R600 PRO KIT
PRO EXPANSION KI
T
Expansion
Po
we
r Port
ST
U
1.5m Expansion
Power Cable
What’s in the Box?
User Manual and
Warranty Card
* Note:
1. PRO KIT will manage and reserve some capacity of the lead-acid batteries to ensure that it will not be
damaged. The reserved capacity percentage could be adjusted on APP. The default setting will be 30% or
higher.
2. It is recommended to use a lead-acid battery 200Ah, discharge rate > 0.3C, and the battery voltage can
still reach up to 20V under 900W load.A 100Ah cell may only be able to discharge 20% of its capacity
depending on the load. Small loads can release more capacity.
3. If you use the 24V lithium iron phosphate battery, make sure the battery has its own BMS to ensure that
its cells will not be overcharged or overdischarged.
4. If the voltage of the solar panel is higher than the voltage of the external battery, PRO KIT cannot be
charged through solar power. Users will need to charge the units by the AC input port of R600 PRO.
5. The temperature protection will be triggered if the battery voltage is too low and after long-term heavy
load discharge. Please place it in a well-ventilated place and after temperature protection, and wait for the
product to cool down to use it again.
To Previous Page
Loading...
