EasyManua.ls Logo

EcoFlow River 600 - AC X-Boost Mode; X-Boost Mode Operation; X-Boost Mode Limitations and Testing

EcoFlow River 600
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
12
Power A Free Life
AC X-Boost Mode
EcoFlow AC X-Boost allows you to use 600W-1200W appliances with the RIVER 600 AC inverter without the
disruption caused by overload protection. As a result, there is no need to buy different electrical devices in
order to use it on the product. Traditional inverters will overload when one electrical appliance with a higher
rated power is connected. Those inverters cannot be used to power such appliances. EcoFlow AC X-Boost
enables the powering of 600W-1200W electrical appliances. Please take note of the following when using this
mode:
1. The X-Boost mode is enabled by default.
You can use the App
to
turn on or off
this function.
Please do not
connect AC output to the home grid under X-Boost mode, otherwise, the low voltage protection will trip
during use.
2. The X-Boost mode is not available in the following situations: in the parallel connection state, the charging
state, X-Boost mode off state.
3. When using appliances with a rated power of 600W-1200W, please only connect to one appliance. When
more than one electrical devices are connected, the change of voltage may affect the usage of other electrical
devices.
* The X-Boost mode is not applicable for all electrical devices. Some devices with a rated power of
600W-1200W that have strict voltage requirements are still not compatible. Please conduct a full test to
confirm before usage, so it will not to affect your work. It is recommended to use electrical equipment with
heating elements and with a rated power between 600-1200W, such as hair dryers, electric kettles, coffee
machines.

Other manuals for EcoFlow River 600

Related product manuals