10
AC X-Boost Mode
X-Boost allows you to use 600W-1200W appliances with the 600W inverter without the disruption caused by
overload protection. Traditional inverters will overload when one electrical appliance with a higher rated pow-
er is connected. Those inverters cannot be used to power such appliances. X-Boost enables the powering of
600W-1200W electrical appliances. Please take note of the following when using this mode:
1. The X-Boost mode is enabled by default. You can use the EcoFlow app to turn this function on/off. Please
do not connect the AC output to grid power when the X-Boost mode is on, doing so will activate the low-volt-
age protection of the power station;
2. The X-Boost mode is not available in the following situations: the charging state and X-Boost mode off state.
3. When using appliances with a rated power of 600W-1200W, please connect only one appliance. When con-
necting more than one electrical device, the change of voltage may affect the usage of other electrical devices.*
* The X-Boost mode is not applicable for all electrical devices. Some devices with a rated power of
600W-1200W that have strict voltage requirements are still not compatible. Please conduct a full test to
confirm before usage, It is recommended to use electrical equipment with heating elements and a rated pow-
er between 600W-1200W, such as hair dryers and electric kettles.
To Next Page
Loading...
