NOTE: Low salt levels will cause a reduction in chlorine production and will
damage the device. High salt levels will increase the possibility of corrosion on
pool equipment.
NOTE: If too much salt has been added, dilute with fresh water.
Use standard test kits to check water chemistry, and use either a conductivity
tester or salt test strip to check saline levels.
(Note that most conductivity testers require frequent calibration to ensure
accurate readings, failure to calibrate the equipment will result in
inaccurate readings.)
How to Calculate volume of a pool
For a rectangular shaped pool
Length (m) x Width (m) x Average Depth (m) x 7.5 x 3.8 = Litres of water
For an oval and round shaped pool
Average length (m) x Average Width (m) x Average Depth (m) x 5.9 x 3.8 =
Litres of water
To Next Page
Loading...