GENERAL OPERATION
Your ECOLAB Aqua Balance Pure Comfort Mineral Pool & Spa ® Model 5.0
system operates when power is activated by the main pumps, and from your
ORP controller, and will continue to operate for as long as power is applied from
those two sources.
•
The system has an output range of 5-100% of the rated chlorine
production, and can be adjusted by turning the black knob of the side of
box 1 in a clockwise or anti-clockwise motion. When adjusting the control
knob on the side of box 1, you will notice the amperage needle of the
gauge on box 3 increases or decreases.
Higher amperage = higher chlorine production.
Normal operating amps and volts for this model device are:
➢ 5.0 - 25 amps @ 15v
•
Water flow through the ECOLAB Aqua Balance Pure Comfort Mineral
Pool & Spa ® Model 5.0 cell is critical. Whether you plumbed your system
in using the pressure drop or bypass method, please ensure that you have
at least 75 Lpm through the cell to achieve the rated chlorine production.
** Remember, your ECOLAB Aqua Balance Pure Comfort Mineral
Pool & Spa ® Model 5.0 system is a chlorine generator, and will only
operate as well as you maintain it. Careful attention must always be
paid to proper chemical balancing, and regular service.
To Next Page
Loading...