warranty offered by re-sellers of ECOLAB Aqua Balance Pure Comfort Mineral
Pool & Spa ® Model 5.0 systems.
SAFETY INFORMATION
PLEASE READ THE FOLLOWING SAFETY INFORMATION CAREFULLY!
WARNING!
•
Only a certified technician may install and service your ECOLAB Aqua
Balance Pure Comfort Mineral Pool & Spa ® Model 5.0 system.
•
Modifying your ECOLAB Aqua Balance Pure Comfort Mineral Pool &
Spa ® Model 5.0 system in anyway may cause bodily injury and will void
your warranty.
•
Warning: To reduce the risk of injury, do not allow children to operate this
device.
•
Do not use this device with bromide products.
•
Only replace components with those specified by manufacturer.
•
When installing your system, ensure that power is linked to the main pump
power source for the pool to ensure that your ECOLAB Aqua Balance
Pure Comfort Mineral Pool & Spa ® Model 5.0 system never operates
when the pumps are off.
•
All boxes on your ECOLAB Aqua Balance Pure Comfort Mineral Pool &
Spa ® Model 5.0 system contain high voltage components. Never open
any box while power is “on”.
•
WARNING: Heavy pool (and/or spa) usage, and higher temperatures may
require higher chlorine output to maintain proper free available chlorine
residuals.
•
If additional chlorine is required due to heavy bather loads, use granular or
liquid chlorine (sodium hypochlorite), to maintain appropriate chlorine
residual in the water.
•
Maintaining high salt and chlorine levels above recommended range can
contribute to corrosion of pool (and/or spa) equipment.
To Next Page
Loading...