4.2 Electronic versions
E 00 = T
erminal box on motor, mechanical stroke adjustment
E 10 = on/off switch, mechanical stroke adjustment
The pump operates as soon as the voltage is applied and the mains switch is set to ‘I’.
DANGER!
Danger of the pump starting automatically
.
The pump is controlled via the power supply.
The automatic start of the pump is started as soon as the power supply is
connected, without having to press a switch/button beforehand.
For safe handling of the pump, a safety switch must be connected on site
or connected via the emergency stop function of the higher-level control
unit.
CAUTION!
The operator of the pump is responsible for avoiding the risk of an accidental
startup of the pump after the power is reconnected using suitable higher level
measures!
Functional description
24417102233 Rev. 3-03.2019
To Next Page
Loading...
Need help?
General
