Ecolab ES-2000HT INTL - Frame & Tub Assemblies

ES-2000HT INTL Installation & Operation Manual 7610-003-24-90
Issued: 07-10-2006 Revised: N/A
SECTION 6: PARTS SECTION
TUB & FRAME ASSEMBLIES
35
Strainer, Accumulator Weldment
05700-031-33-13
Accumulator Weldment
05700-002-19-05
Frame Weldment
05700-002-08-34
Brace, Lower Frame Weldment
05700-002-12-72
Brace, Frame Weldment
05700-002-14-62
Bullet Feet
05340-108-01-03
Tub Weldment
05700-002-08-99
*Bulkhead Fitting, 45 1/2” Hose Barb, S/S
04730-002-69-80
Gasket, Tub Drain
05330-002-10-56
Refer to Motor & Pump
Assembly Page
* Represents an item not shown.
Plug, Rear Corner
05700-002-25-01
Plug, Front Corner
05700-002-25-00
Hose, 3/8" I.D. x 5/8" O.D. x 14" Long
05700-002-04-40
Clamp, Mini 7/16" - 25/32"
04730-011-36-05
Elbow, 90° 3/8" x 1/8"
04730-002-18-96