Ecolab ES-2000HT INTL - Page 49

ITEM QTY DESCRIPTION Mfg. No.
1 1 Upper Manifold 05700-031-34-82
2 4 Nut, 3/8"-16 S/S Hex 05310-276-01-00
3 4 Lockwasher, 3/8” 05311-276-01-00
4 2 O-Ring 05330-111-35-15
5 1 Positioning Bracket, Manifold Tube 05700-011-34-63
6 1 Tube, Wash Manifold 05700-002-08-32
7 2 Gasket, Manifold 05700-111-35-03
8 2 Wash Arm 05700-021-63-42
9 5 Locknut, 1/4"-20 S/S Hex with Nylon Insert 05310-374-01-00
2 Rinse Arm Complete Assembly 05700-031-73-54
10 1 Rinse Arm 05700-031-73-53
11 2 Rinse Arm Plug 04730-609-04-00
12 1 Bushing, Rinse Head 05700-021-33-84
13 2 Washer, Nylon 05330-011-42-10
14 1 Retaining Ring 05340-112-01-11
15 1 Lower Wash Manifold 05700-021-63-73
16 2 Bearing Assembly 05700-021-35-97
17 1 Rinse Manifold Assembly 05700-021-47-61
18 2 Bolt, 3/8"-16 x 1" S/S 05305-276-03-00
19 2 Bearing, Rinse Head 03120-002-72-24
20* 2 Wash Arm End Cap 05700-011-35-92
21* 1 Nut, P/P For 1/8" Tubing 04730-011-59-45
22* 1 Fitting, Outlet Elbow 04820-111-51-18
23* 1 Check Valve 04820-111-51-14
24* 1 Fitting, 1/4” Imperial Brass 05310-924-02-05
25* 1 Thermostat Probe Adapter 05700-002-29-75
ES-2000HT INTL Installation & Operation Manual 7610-003-24-90
Issued: 07-10-2006 Revised: N/A
SECTION 6: PARTS SECTION
WASH & RINSE ARM/MANIFOLD ASSEMBLIES (CONTINUED)
44