EcoLet 25e - Operation

7
Operation
Starting with empty toilet
1. Mix the bulking agents (40% peat moss, 60% hemp/wood-shavings) provided with your
toilet, this creates a very absorbent bulking agent.
2. Add a 150mm layer of bulking agent mix into the main chamber of the toilet through the
toilet seat. Some of the mix will fall down into the collection tray, add this back to the main
chamber.
3. Connect the mains plug into a grounded wall socket, switch the system on and turn the dial
totherstpositionsothatonlythegreenlightison(justthefan,nottheheater)
4. Make sure that when the fan is running you don’t have the bowl cover in place, this acts like
a plug and seals the composting chamber only when the system is not in use.
The mixer arm
• The mixer arm will turn a full revolution when switched on.
• If you lift the seat and place it down the mixer arm will turn a full revolution.
• If you sit on the toilet the mixer arm will turn a full revolution when you get up.
Add a 150mm layer
of bulking agent.
Bulking agent will fall
into the tray.
Example of bulking agent volume estimation