To Next PageTo Next Page
Need help?Do you have a question about the Econ ELA500 and is the answer not in the manual?
General| Brand | Econ |
|---|---|
| Model | ELA500 |
| Category | Controller |
| Language | English |
Manual contains safety notices and precautions for personal injury and equipment damage.
Table detailing enclosure, power supply, duty type, motor, switches, and other technical specifications.
Table comparing ELA actuator models with torque, operating time, current, and weight.
Checks before installation: power supply, wiring, and actuator type plate verification.
Specific warnings and enclosure types for hazardous area installations.
Instructions for securely mounting the actuator to the valve, considering orientation and drive output.
Procedure for setting the actuator's open and close limit switches using cams.
Steps to calibrate the CPT's zero and span settings for accurate output signals.
Procedure for electrical connections, preliminary testing, and safety precautions.
Troubleshooting steps when the actuator fails to respond to commands.
Troubleshooting steps for when power is supplied but the actuator is not operating.
Troubleshooting steps for erratic actuator movement and potential causes.
Wiring diagrams for ELA80/100 actuators with various power and control options.
Wiring diagrams for ELA150-3000 actuators with 3PH power supplies.
Wiring diagrams for ELA150-3000 actuators with 1PH power supplies.
Wiring diagrams for ELA150-300 actuators with 24V power supplies.
Wiring diagrams for ELA actuators with Rechargeable Battery Pack (RBP) and PCU options.
Internal and external grounding procedures for ELA80-100 actuators.
Internal and external grounding procedures for ELA150-3000 actuators.
