To Next PageTo Next Page
Need help?Do you have a question about the Econ ELA150 and is the answer not in the manual?
General| Brand | Econ |
|---|---|
| Model | ELA150 |
| Category | Controller |
| Language | English |
Provides safety notices and precautions for reducing injury and equipment damage risks during installation, operation, or maintenance.
Covers checks before installation, including power supply verification and safety precautions.
Provides specific warnings and requirements for installing actuators in potentially explosive environments.
Explains the process and considerations for mounting the actuator, including ISO 5211 standards.
Provides step-by-step instructions on how to set the actuator's open and close limit switches using cams.
Explains the function of torque switches and advises contacting the manufacturer for re-setting.
Guides on adjusting the mechanical travel stops to define the actuator's fully open and closed positions.
Provides instructions for calibrating the ZERO and SPAN settings of the CPT for accurate position feedback.
Introduces the PCU for converting open-close actuators to modulating actuators, detailing its features.
Details how to configure PCU functions, including selecting input/output signals and fail positions.
Explains how to operate the actuator in Stop, Local, Remote (Manual/Modulating), and Battery modes.
Guides on electrical connections, safety precautions, and preliminary testing before full operation.
Provides general maintenance guidelines, frequency, and safety warnings for actuators.
Provides the wiring diagram for ELA80/100 actuators equipped with a 24VDC PCU.
Details the wiring for ELA150-3000 actuators with 230VAC, 3-phase power and PCU.
Shows the wiring diagram for ELA150-3000 actuators with 115/230VAC, 1-phase power and CPT.
Shows the wiring diagram for ELA150-ELA300 actuators with RBP and PCU.
Provides the wiring diagram for ELA150-300 actuators with 24VDC PCU.
