29.
Your ECOPED is equipped with a rear wheel lock, to prevent the rear
wheel from rotating. To engage, insert an alternative, elongated key
and turn clockwise. When engaged, the rear wheel should lock up
and rotation should not be possible.
4.9.2 DOUBLESTAND
The double stand is a larger stand that uses two metal legs to balance
your ECOPED. When deploying, make sure that the ground surface
underneath is hard and rough. Use the little foot pedal to pull the stand
out halfway and then push the bicycle backward, while at the same
time pushing on the little pedal. The double stand is more reliable
andsturdythantheickstandandshouldbeusedwhenparkingon
uneven surfaces. The double stand should also be used during service
parking. When folding the double stand back its position, step on the
little foot pedal and force the bicycle forward while keeping your weight
on the pedal. Never sit on your ECOPED when it is parked with the
double stand deployed, as this may permanently damage the kick-
stand mechanism.
5. MAINTENANCE
Maintaining your ECOPED requires commitment and a schedule that
must include visits to your local dealers.
CAUTION!
Failure to properly inspect and maintain your ECOPED will result in
faster degradation and wear of parts, as well as unpredictable behav-
iour, which may put your safety at risk.
Always inspect your ECOPED each time before you ride and make
sure it is in a safe operating condition.
5.1 BATTERY MAINTENANCE
Your rechargeable battery must be handled with care due to the nature
of chemicals inside. If unused for a long period of time, the battery
must be removed from your ECOPED and stored in a dry place at
room temperature. Leaving the battery outdoors where temperatures
may shift drastically will damage the battery.
To Next Page
Loading...
