Safety Information
1
To prevent injury to user, others and/or property damage, the following safety instructions must be
followed. Ignoring these instructions may cause harm or damage due to faulty operation.
Seriousness is indicated by the following symbols:
• Do not exceed the rating of the power circuit or share the outlet with other appliances.
• Do not start or stop the chiller by switching the power source on/off or by plugging or
unplugging the power cord.
• Always use the factory-installed 3-prong, grounded, polarized power plug and cord.
• Never attempt to operate chiller with a damaged or modified power cord.
• Do not insert or remove plug from outlet with wet hands or standing in water.
• Do not place chiller near a heat source, flammable materials or hazardous chemicals.
• Disconnect the power if strange sounds, smells or smoke come from the unit.
• Never attempt to take apart or repair the chiller yourself. Repairs must be done by factory
authorized service personnel.
• Before cleaning the chiller, always turn off the power and unplug the power cord.
• Do not drink or use any water drained from the unit.
WARNING!
Possible death or serious injury.
CAUTION
Possible injury or property damage.
WARNING!
• Do not install chiller in closets, cabinets or other small spaces.
• Do not place chiller where water may splash or leak onto the unit.
• Never cover the intake or exhaust openings with clothes, towels or other objects.
• Use extreme caution when operating near children, the elderly and infirm.
• Never insert fingers or foreign objects into ventilation grilles or other openings.
• Do not place heavy objects on the power cord or run it under carpets and rugs.
• Do not climb, sit or stand on the chiller, or place objects on top of it.
• Clean filter every two weeks, making sure it is installed securely.
• If water enters the chiller due to a leak or spill, turn it off and disconnect the power. Contact
a qualified service technician.
CAUTION
To Next Page
Loading...
