How to reorient a filter cartridge in ECOPURE EPWHE Water Filtration Systems?
If the replacement filter cartridge does not fit in the filter sump of your ECOPURE Water Filtration System, it may not be properly oriented. Reorient the filter cartridge as shown in Figure 13.
Why is water leaking from the ECOPURE Water Filtration System adaptor at the threads?
If water leaks from the adaptor at the threads of your ECOPURE Water Filtration System, it's likely due to an inadequate seal. To fix this, reinstall the adaptor using adequate Teflon® tape or a plastic compatible pipe sealant on the threads.
What to do if water drips from the outlet side of ECOPURE Water Filtration Systems filter head?
If water drips from the outlet side of the filter head, near the vent tube, on your ECOPURE Water Filtration System, it indicates water is flowing back through the vent hose. Ensure that the vent hose is not elevated above the filter head to resolve this issue.
Why is water leaking from the adaptor at o-rings in my ECOPURE Water Filtration System?
If your ECOPURE Water Filtration System is leaking water from the adaptor at the o-rings, it suggests that the o-ring is damaged. Inspect the o-ring and replace it if damage is found.
How to fix an ECOPURE Water Filtration System lid that doesn't fit on the filter?
If the lid of your ECOPURE Water Filtration System doesn't fit on the filter, it's probably because the filter cartridge is not properly oriented. Reorient the filter cartridge as shown in Figure 13.
What to do if the lid clamp cannot be latched on my ECOPURE Water Filtration System?
If the lid clamp of your ECOPURE Water Filtration System cannot be latched, the filter cartridge might not be correctly oriented. Try reorienting the filter cartridge as shown in Figure 13.
Detailed instructions for removing and replacing the filter cartridge from the sump.
General| Brand | ECOPURE |
|---|---|
| Model | EPWHE |
| Category | Water Filtration Systems |
| Language | English |
To Next Page
