Why does my ECOPURE Water Filtration System have a bad taste or odor?
A bad taste or odor in your ECOPURE Water Filtration System could be due to a couple of reasons. Either Filter 1 and 2 are expended and you need to replace the filter cartridges, or the system is contaminated and you need to sanitize system. Call 1-800-693-1138 for instructions.
What to do if ECOPURE Water Filtration Systems leaks at push connect fittings?
If your ECOPURE Water Filtration System is leaking at the push connect fittings, here are a few things to check: * Make sure the tubing is pushed in all the way into the fittings. * Ensure the tubing is cut square. * If the tubing is nicked, remove the nicked portion and reinsert the tubing into the fitting. * If the outer tubing surface is not smooth, remove the rough portion and reinsert the tubing into the fitting.
How to fix ECOPURE ECOP20 faucet LED indicator light that doesn't work after battery change?
If the faucet LED indicator light on your ECOPURE Water Filtration System doesn't function after a battery change, the battery may be dead, so replace it with a new one. Alternatively, the battery may be installed incorrectly, so ensure it is installed correctly.
Connects the cold water supply to the filtration system, ensuring a leak-tight connection.
Instructions for drilling the hole and preparing the sink or countertop for the faucet.
Guide on how to attach the filtered water faucet to the mounting surface.
Detailed instructions for connecting the system's tubing to the supply and faucet.
General| Brand | ECOPURE |
|---|---|
| Model | ECOP20 |
| Category | Water Filtration Systems |
| Language | English |
To Next Page
