EasyManuals Logo

EcoSmart ECO 18 Installation Instructions & Homeowner's Manual

EcoSmart ECO 18
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
INSTALLATION INSTRUCTIONS & HOME OWNERS MANUAL
MODELS: ECO 16 18 21 24 27
IMPORTANT SAFETY INFORMATION
As when installing or using any high voltage electrical appliance, basic safety precautions should always
be followed. Under no circumstances should you attempt to clean, install, inspect, repair, disassemble or
otherwise service this water heater without first shutting off all power to the unit directly at the breaker
box. SERIOUS BODILY INJURY OR DEATH COULD OCCUR IF YOU IGNORE THIS WARNING.
THIS PRODUCT MUST BE INSTALLED BY A QUALIFIED ELECTRICIAN & PLUMBER IN ACCORDANCE WITH
ALL NATIONAL, STATE, PROVINCIAL AND LOCAL ELECTRICAL & PLUMBING CODES.
PLEASE READ THESE INSTRUCTIONS THOROUGHLY AND COMPLETELY PRIOR TO INSTALLATION & USE.
FAILURE TO DO SO COULD CAUSE PROPERTY DAMAGE OR SERIOUS INJURY OR DEATH & VOID YOUR
WARRANTY
This manual should be given to the homeowner after installation and should be retained for future
reference.
Please note: Installations in the commonwealth of Massachusetts and state of Kentucky require a
pressure relief valve.
THIS WATER HEATER WAS TESTED WITH BOTH WATER AND ELECTRICAL CONNECTIONS SIMULATING A
STANDARD INSTALLATION PRIOR TO SHIPPING.

Other manuals for EcoSmart ECO 18

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the EcoSmart ECO 18 and is the answer not in the manual?

EcoSmart ECO 18 Specifications

General IconGeneral
Power SourceElectric
Model NumberECO 18
Voltage240V
Wattage18 kW
Amperage75A
Water Connection3/4" NPT
Dimensions17 x 14 x 3.75 inches
Temperature Range80-140°F
TypeTankless
Heating MethodElectric Element
Wire Size8 AWG
WarrantyLifetime
Required Breaker2 x 40 Amps Double Pole
Weight11 lbs

Related product manuals