EcoSmart POU 6T User Manual

Electric Tankless Water Heaters
INSTALLATION INSTRUCTIONS & HOME OWNERS MANUAL
POU 4T | POU 6T
IMPORTANT SAFETY INFORMATION
When installing or using any high voltage electrical appliance, basic safety precautions should always be
followed. Under no circumstance should you attempt to clean, install, inspect, repair, disassemble or
otherwise service this water heater, without first shutting off all power to the unit directly at the circuit
breaker box. SERIOUS BODILY INJURY OR DEATH COULD OCCUR IF YOU IGNORE THIS WARNING.
THIS PRODUCT SHOULD BE INSTALLED BY A QUALIFIED ELECTRICIAN AND A QUALIFIED PLUMBER IN
ACCORDANCE WITH ALL NATIONAL, STATE, PROVINCIAL AND LOCAL ELECTRICAL & PLUMBING CODES.
PLEASE READ THESE INSTRUCTIONS THOROUGHLY AND COMPLETELY PRIOR TO INSTALLATION & USE.
FAILURE TO DO SO COULD CAUSE PROPERTY DAMAGE, SERIOUS INJURY, OR DEATH.
This manual should be given to the homeowner after installation and should be retained for future reference.
Tested and certified by the Water Quality Association against NSF/ANSI 372 for lead free
compliance.
Recognize this symbol as an indication of Important Safety Information!
DO NOT destroy this manual. Please read carefully and keep it in a safe place for future reference

EcoSmart POU 6T Specifications

General

Model Number	POU 6T
Voltage	240V
Amperage	25 A
Water Connection	1/2" NPT
Phase	Single Phase
Minimum Circuit Breaker	30 A
Required Wire Gauge	10 AWG
Activation Flow Rate	0.3 GPM
Type	Tankless
Power	6 kW
Temperature Range	80-140°F
Wattage	6000 Watts
Connection	Electric

Summary

Important Safety Information

General Safety Warnings

Critical warnings about electrical hazards, installation, and manual use to prevent injury or death.

Installation Compliance

Ensures installation by qualified professionals and adherence to all applicable electrical and plumbing codes.

Water Temperature Safety and Operation

Scalding Risk Management

Guidance on safe water temperatures, scald prevention for vulnerable groups, and temperature control features.

Heater Performance Factors

Installation Site and Mounting

Location Requirements

Plumbing and Electrical Installation

Plumbing Connection Guide

Step-by-step instructions for water connections, air purging, pressure limits, and leak checks.

Electrical Connection Guide

Guidance on wiring, breaker requirements, conduit fitting, and ensuring correct connections.

Electrical Specifications

Wiring Diagrams and Specifications

Troubleshooting

Common Issues and Solutions