Need help?Do you have a question about the EcoSmart EcoWave EcoTouch and is the answer not in the manual?
General| Connectivity | Wi-Fi |
|---|---|
| Voltage | 24V |
| Control Method | App, Touchscreen |
| Power Source | Battery |
| Features | Geofencing |
| Display | Touchscreen |
| Mounting | Wall |
Explains documentation conventions, symbols, and formatting.
Describes the system's function in reducing HVAC energy consumption.
Details FCC compliance and related conditions for operation.
Details the EcoTouch display unit and its placement.
Details the EcoSource HVAC controller and its capabilities.
Explains wiring conventions and power source options for the EcoSource.
Outlines different mounting options for high and low voltage installations.
Introduces high voltage installation procedures.
Lists all necessary tools and components for high voltage installation.
Guides on correctly orienting the adapter plate for mounting.
Provides a detailed pinout and function mapping for high voltage wiring.
Introduces low voltage installation and safety precautions.
Step-by-step guide for mounting the EcoSource in drywall.
Detailed steps for installing the EcoSource using a vertical JBOX mount.
Detailed steps for installing the EcoSource using a horizontal JBOX mount.
Provides a detailed pinout and function mapping for low voltage wiring.
Details the pinout and function of the J5 connector.
Guidelines for selecting the optimal mounting location for the EcoTouch.
Best practices for mounting the EcoTouch thermostat.
Overview of the EcoTouch front panel controls and user interface elements.
Details on accessing and interpreting weather forecast data.
Instructions for customizing screen brightness and language settings.
Outlines the required order for associating devices.
Step-by-step guide to pair the EcoTouch with the EcoSource.
Procedures for changing the EcoTouch channel.
Steps to remove an existing EcoTouch-EcoSource pairing.
How to enable and configure display modes like Demo Mode.
How to access and view system status details on the EcoTouch.
Guidelines for routine visual and functional inspections of the system.
Potential causes and solutions for the HVAC unit failing to operate.
Addressing problems where rooms are too hot or too cold.
Solutions for "Sensor Down" messages and sensor association issues.
Investigating why the HVAC might shut down unexpectedly.
Troubleshooting issues where only heating or cooling works.
Diagnosing why the room temperature doesn't reach the setpoint in time.
Instructions for controlling proportional valves using the thermostat.
Steps to calibrate the analog output signal to 5.0V.
To Next Page
