ECS Tuning BMW S54 - Return to Table of Contents

ECS TUNING 1000 SEVILLE RD. WADSWORTH, OH 44281 1.800.924.5172 WWW.ECSTUNING.COM
5
BMW S54 DUAL VANOS REBUILD
®
Return to Table of Contents
SPECIALTY TOOLS
The BMW fan clutch tools are very helpful for removing the
fan/clutch. The wrench fits the large nut that holds the fan/
clutch to the water pump and the holding fixture will lock
onto two of the water pump bolts so you can hold it stationary
to break the fan loose.
The BMW S54 camshaft alignment tool set is required for
engine timing. During this repair, you will need to lock the
crankshaft in place and use the camshaft bridge and pins to
properly time the engine. For some cars, you will also need
the special crankshaft socket.
ES#2627584 ES#3145744