ECS A55F-M2

37
Using BIOS
Super IO Configuration
Use this item to show the information of Super IO configuration.
Super IO Configuration
Serial Port 0 Configuration
Parallel Port Configuration
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Version 2.11.1210. Copyright (C) 2011, American Megatrends, Inc.
Set Parameters of Serial Port
0 (COMA)
Main Advanced Chipset M.I.B.III Boot Security Save & Exit
f
Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc.
f
fSerial Port 0 Configuration
Scroll to this item and press <Enter> to view the following screen:
Serial Port (Enabled)
This item allows you to enable or disable serial port.
Device Settings (IO=3F8h; IRQ=4)
This item shows the information of the device settings.
Change Settings (Auto)
Use this item to change device settings.
Serial Port 0 Configuration
Serial Port [Enabled]
Device Settings IO=3F8h; IRQ=4;
Change Settings [Auto]
Version 2.11.1210. Copyright (C) 2011, American Megatrends, Inc.
Enabled or Diabled Serial Port
(COM)
Main Advanced Chipset M.I.B.III Boot Security Save & Exit
Press <Esc> to return to the Super IO Configuration page.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
+/- : Change Opt.
lk
mn
: Select Screen
/Click: Select Item
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC/Right Click: Exit
Enter/Dbl Click : Select
+/- : Change Opt.
lk
mn
: Select Screen
/Click: Select Item
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC/Right Click: Exit
Enter/Dbl Click : Select