Chapter 3
A55F2-M3 USER MANUAL
43
Press <Esc> to return to the M.I.B III Menu page.
When end-users encounter failure after attempting over-clocking, please take the
following steps to recover from it.
1. Shut down the computer.
2. Press and hold the “Page Up Key (PgUp)” of the keyboard, and then boot the PC
up.
3. Two seconds after the PC boots up, release the “Page Up Key (PgUp)”.
4. The BIOS returns to the default setting by itself.
Warning:
Over-clocking components can adversely affect the reliability of the system
and introduce errors into your system. Over-clocking can permanently
damage the motherboard by generating excess heat in components that are
run beyond the rated limits.
Fail-Safe Procedures for Over-clocking
CPU Over-clocking Func. (Disabled)
This item decides the CPU Over-Clocking function installed in your system. If the
over-clocking fails, please turn off the system power. And then, hold the PageUp key
(similar to the Clear CMOS function) and turn on the power, the BIOS will recover the
safe default.
IGD Over-clocking Func. (Disabled)
This item enables or disables IGD Over-Clocking function.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
