32
Using BIOS
ATA 66/100 IDE Cable Msg. (Enabled)
Enables or disables the ATA 66/100 IDE Cable Msg. This message will appear during
reboot when you use 40-pin cable on your 66/100 hard disks.
Removable Device Priority (Press Enter)
Scroll to this item and press <Enter> to view the following screen:
1. Floppy Disks Item Help
Menu Level
Phoenix-Award WorkstationBIOS CMOS Setup Utility
Removable Device Priority
Use<> or <> to
select a device, then
press<+> to move it
up, or <-> to move it
down the list. Press
<ESC> to exit the
menu.
Press <Esc> to return to the main BIOS setting page.
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
: Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1: General Help
Advanced BIOS Features
This option defines advanced information about your system.
Item Help
Menu Level
Phoenix-Award WorkstationBIOS CMOS Setup Utility
Advanced BIOS Features
Hard Disk Boot Priority [Press Enter]
Network Boot Priority [Press Enter]
CPU Internal Cache [Enabled]
External Cache [Enabled]
Quick Power On Self Test [Enabled]
First Boot Device [Hard Disk]
Second Boot Device [Hard Disk]
Third Boot Device [CDROM]
Boot Other Device [Enabled]
Boot Up Floppy Seek [Disabled]
Boot Up NumLock Status [On]
Security Option [Setup]
OS Select For DRAM>64MB [Non-OS2]
HDD S.M.A.R.T Capability [Disabled]
Full Screen LOGO Show [Enabled]
Small Logo (EPA) Show [Enabled]
Removabled Device Priority [Press Enter]
ATA 66/100 IDE Cable Msg [Enabled]
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
: Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1: General Help
To Next Page
Loading...
