40
Using BIOS
ATI Azalia Audio [Auto]
ATI SATA Controller [Enabled]
ATI SATA Type [Native IDE]
SB600 Spread Spectrum [Disabled]
USB 2.0 Controller [Enabled]
USB Controller [Enabled]
USB Legacy Support [Enabled]
USB Mouse Support [Enabled]
USB Storage Support [Enabled]
South OnChip PCI Device (Press Enter)
Scroll to this item and press <Enter> to view the following screen:
Item Help
Menu Level
Phoenix-Award WorkstationBIOS CMOS Setup Utility
South OnChip PCI Device
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
: Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1: General Help
ATI Azalia AUDIO (Auto)
This option allows you to control the onboard Azalia audio. Disable this item if you
are going to install a PCI audio add-on card.
ATI SATA Controller (Enabled)
This item allows you to control Serial ATA controller.
ATI SATA Type (Native IDE )
This item allows you to manually specify the onboard Serial ATA Type.
SB600 Spread Spectrum (Disabled)
This item ,when enabled, can significantly reduce EMI (Electromagnetic Interfer-
ence) generated by the SB600.
USB 2.0 controller (Enabled)
Enable this item if your system supports USB 2.0.
USB Controller (Enabled)
This item enables the USB controller. Leave this at the default “Enabled” if you
want to connect USB devices to your computer.
USB Legacy Support (Enabled)
Use this item to enable or disable support for legacy USB devices. Setting to Auto
allows the system to detect the presence of USB devices at startup. If detected,
the USB controller legacy mode is enabled. If no USB device is detected, the
legacy USB support is disabled.
USB Mouse Support (Enabled)
Enable this item if you plan to use a mouse connected through the USB port in a
legacy operating system (such as DOS) that does not support Plug and Play.
USB Storage Support (Enabled)
Use this item to enable or disable the USB Storage function.
Press <Esc> to return to the Advanced Chipset Features page.
To Next Page
Loading...
Need help?
General
