30
Using BIOS
Standard CMOS Setup
This option displays basic information about your system.
Help Item
CMOS Setup Utility - Copyright (C) 1985-2009, American Megatrends, Inc.
Use [ENTER], [TAB]
or [SHIFT
-TAB] to
select a field.
Use [+] or [-] to
configure system Date.
Standard CMOS Setup
Date & Time
The Date and Time items show the current date and time on the computer. If you are
running a Windows OS, these items are automatically updated whenever you make
changes to the Windows Date and Time Properties utility.
Date (www mm:dd:yy) Tue 11/17/2009
Time (hh:mm:ss) 00 :00:57
SATA1 ATAPI CDROM
S
ATA2 Hard Disk
SATA3 Not Detected
SATA4 Not Detected
SATA5 Not Detected
SATA6 Not Detected
IDE BusMaster Enabled
Drive A: 1.44 MB 3
1
/
2
”
: Move
F10: Save ESC: Exit
Enter : Select
+/-/: Value
F9: Optimized Defaults
F1: General Help
SATA1~6
CMOS Setup Utility - Copyright (C) 1985-2009, American Megatrends, Inc.
SATA1
Help Item
Select the type
of device connected
to the system.
This motherboard supports six SATA channels and each channel allows one SATA
device to be installed. Use these items to configure each device on the SATA channel.
SATA1
Device : ATAPI CDROM
Vendor : PLEXTOR DVDR PX-760A
LBA Mode : Supported
PIO Mode : 4
Async DMA : Multiword DMA-2
Ultra DMA : Ultra DMA-4
Type Auto
PIO Mode Auto
DMA Mode Auto
: Move
F10: Save ESC: Exit
Enter : Select
+/-/: Value
F9: Optimized Defaults
F1: General Help