ECS H55H-CM User Manual

9
Installing the Motherboard
Checking Jumper Settings
The following illustration shows the location of the motherboard jumpers. Pin 1 is
labeled.
Jumper Settings
Jumper
Type Description Setting (default)
CLR_CMOS
3-pin
Clear CMOS
1-2: NORMAL
2-3: CLEAR CMOS
Before clearing the
CMOS, make sure to
turn off the system.
1
CLR_CMOS
To avoid the system unstability after clearing CMOS, we recommend users to
enter the main BIOS setting page to “Load Default Settings” and then
“Save and Exit Setup”.

ECS H55H-CM Specifications

General

Brand	ECS
Model	H55H-CM
Category	Motherboard
Language	English