ECS H77H2-M3 User Manual

Chapter 3
H77H2-M4 USER MANUAL
39
CPU Configuration
The item in the menu shows the CPU.
Enabled for windows XPand
Linux (OS optimized for
Hyper-Threading
Technology) and Disabled
for other OS (OS not
optimized for
Hyper-Threading
Technology). when Disabled
only one thread per
enabled core is enabled.
Main Advanced Chipset M.I.B III Boot Security Save & Exit
Enter/Dbl Click : Select
Genuine Intel(R) CPU @ 1.80GHz
This is display-only field and displays the information of the CPU installed in your
computer.
EMT64 (Supported)
This item shows the computer supports EMT64.
Processor Speed (1300MHz)
This item shows the current processor speed.
Processor Stepping (306a2)
This item shows the processor stepping version.
Microcode Revision (8)
This item shows the Microcode version.
Processor Cores (2)
This item shows the core number of the processor.
Intel HT Technology (Supported)
This item shows the computer supports Intel HT Technology.
Intel VT-x Technology (Supported)
This item shows the computer supports Intel VT-x Technology.
Hyper-threading (Enabled)
This item only available when the chipset supports Hyper-threading and you are
using a Hyper-threading CPU.
+/- : Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
ESC/Right Click: Exit
F4: Save & Exit
mn
/Click: Select Item
lk
: Select Screen
CPU Configuration
Genuine Intel(R) CPU @ 1.80GHz
EMT64 Supported
Processor Speed 1300 MHz
Processor Stepping 306a2
Microcode Revision 8
Processor Cores 2
Intel HT Technology Supported
Intel VT-x Technology Supported
Hyper-threading Enabled
Limit CPUID Maximum
Disabled
Execute Disable Bit Enabled
Intel Virtualization Technology Disabled
CPU C3 Report Enabled
CPU C6 Report Enabled
Enhanced Halt (C1E) Enabled

ECS H77H2-M3 Specifications

General

Brand	ECS
Model	H77H2-M3
Category	Motherboard
Language	English