Chapter 3
B85H3-M7 USER MANUAL
54
0
Mc Lock (Enabled)
This item allows you to enable or disable capacity to lock MC registers or not.
CMD Tri-State (Enabled)
This item allows you to enable or disable the CMD Tri-State (ending of the training).
Memory Scrambler (Enabled)
This item allows you to enable or disable the memory scrambler.
MRC Fast Boot (Enabled)
This item allows you to enable or disable the WRC fast boot.
Memory Remap (Enabled)
This item allows you to enable or disable the memory remap above 4G.
Memory Thermal Management (Enabled)
This item allows you to enable or disable the memory thermal management.
DDR PowerDown and Idle counter (BIOS)
This item allows you to BIOS or PCODE the DDR Power Down and Idle counter. BIOS:
BIOS is in countrol of DDR CKE mode and idle timer value. PCODE: pcode will
manage the modes.
Refresh 2x Mode (Disabled)
This item allows you to enable or disable 2xRef when warm and Hot 2-iMC enables
2xRef when Hot.
Press <Esc> to return to the M.I.B. III Menu page.
To Next Page
Loading...
Need help?
General
