Chapter 3
H87H3-M4 USER MANUAL
50
Parallel Port (Enabled)
This item allows you to enable or disable parallel port.
Device Settings (IO=378h; IRQ=4; DMA=3;)
This item shows the information of the device settings.
Change Settings (Auto)
Use this item to change device settings.
Parallel Port Configuration
Scroll to this item and press <Enter> to view the following screen:
Main Advanced Chipset M.I.B. III Boot Security Exit
+/- : Change Opt.
Enter/Dbl Click : Select
: Select Screen
/Click: Select Item
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC/Right Click: Exit
Enabled or Disabled Parallel
(LPT/LPTE)
Press <Esc> to return to the Super IO Configuration page.
Parallel Port Configuration
Parallel Port Enabled
Device Settings IO=378h; IRQ=4; DMA=3;
Change Settings Auto
Device Mode ECP Mode
Device Mode (ECP Mode)
This item shows the information of the device mode.
To Next Page
Loading...
Need help?
General
