ECS H11H4-I

1
Introducing the Motherboard
Chapter 1
Introducing the Motherboard
Introduction
Thank you for choosing the H11H4-I motherboard. This motherboard is a high
performance, enhanced function motherboard designed to support Intel Skylake
processors for high-end business or personal desktop markets.
This motherboard is based on integrated Intel Chipset for best desktop platform
solution.
Skylake is a dual-core processor. The chipset for Skylake is highly inte-
grated and high performance. Moreover, Skylake will feature DirectX11.1-compli-
ant GCN-based graphics and support Win8 and UEFI Secure Boot. This motherboard
supports up to 16 GB
260pin SO-DIMM memory with dual-channel DDR4 2133
(1GB/ 2GB/ 4GB/ 8GB) SDRAM. One PCI Express x16 slot is supported, is fully
compliant to the PCI Express Base Specification revision 2.0. One Mini PCIE is also
supported. It implements an EHCI (Enhanced Host Controller Interface) compliant
interface that provides four USB 2.0 ports (two USB 2.0 headers support additional
four USB 2.0 ports and one port is supported by mPCIE 2.0 USB signal) and four USB
3.0 ports at the rear panel.
The motherboard is equipped with advanced full set of I/O ports in the rear panel,
including PS/2 mouse and PS/2 keyboard connectors, two Serial ports (COM), one
VGA port, two Lan ports, four USB 3.0 ports, one HDMI port and audio jacks for
line-out and Mic-in.
In addition, this motherboard supports two SATA 6.0Gb/s connectors.

ECS H11H4-I Specifications

General

Form Factor	Mini-ITX
Socket Type	LGA 1151
Chipset	Intel H110
Memory Slots	2
Max Memory Capacity	32 GB
Supported Memory Types	DDR4
Audio	Realtek ALC887
LAN	Realtek RTL8111H
Expansion Slots	1 x PCIe 3.0 x16
M.2 Slots	1
Storage Interface	4 x SATA III
Video Output	1 x HDMI, 1 x DVI-D

Summary

Introducing the Motherboard

Motherboard Features

Details core features: Processor, Chipset, Memory, Audio, Ethernet LAN, and I/O ports.

Specifications and System BIOS

Provides technical specifications and explains System BIOS features, Form Factor, Drivers, and Certification.

Motherboard Component Diagram

Illustrates the layout of motherboard components with a visual diagram and component list.

Installing the Motherboard

Safety, Case, and Installation

Covers safety precautions, case selection, and the physical installation of the motherboard.

Configuration and Jumpers

Explains how to set system configuration options using motherboard jumpers.

Hardware Installation: Memory and Slots

Details installing memory modules and add-on cards into expansion slots.

Connecting Devices and Interfaces

Guides on connecting optional devices, front panel headers, and specific interfaces (COM, SATA, LVDS).

Case Component Wiring

Explains connecting external I/O devices and internal case components like fans, LEDs, and power.