41
Using BIOS
Press <Esc> to return to the Integrated Peripherals page.
Onchip USB (V1.1+V2.0)
This item enables users to enable or disable the onchip USB function, setting it to be
USB1.1 or USB2.0 compatible.
Onboard Device Setup (Press Enter)
Scroll to this item and press <Enter> to view the following screen:
Phoenix-Award WorkstationBIOS CMOS Setup Utility
Onboard Device Setup
Item Help
Menu Level
Onchip USB [V1.1 + V2.0]
USB Keyboard Support [Enabled]
USB Mouse Support [Enabled]
HD Audio [Auto]
Onboard PCIE Lan device [Enabled]
Onboard PCIE Lan Boot ROM [Disabled]
F5:Previous Values F6: Fail-Safe Defaults F7:Optimized Defaults
: Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1: General Help
USB Mouse Support (Enabled)
Enable this item if you plan to use a mouse connected through the USB port in a
legacy operating system (such as DOS) that does not support Plug and Play.
HD Audio(Auto)
Enables and disables the onboard audio chip. Disable this item if you are going to
install a PCI audio add-in card.
Onboard PCIE Lan device (Enabled)
Enables or disables the Onboard PCIE Lan device.
USB Keyboard Support (Enabled)
Enable this item if you plan to use a keyboard connected through the USB port in a
legacy operating system (such as DOS) that does not support Plug and Play.
Onboard PCIE Lan Boot ROM (Disabled)
This item enables or disables onboard PCIE LAN Boot ROM.
Press <Esc> to return to the Integrated Peripherals page.
To Next Page
Loading...
Need help?
General
