44
Using BIOS
Resume by PCI-E PME (Disabled)
This system can be turned off with a software command. If you enable this item,
the system can automatically resume if there is an incoming call on the PCI
Express card. You must use an ATX power supply inorder to use this feature. Use
this item to do wake-up action if inserting the PCI Express card.
Resume by WOM/Ring (Disabled)
An input signal on the serial Ring indicator (RI) line (in other words, and incoming
call on the modem)/LAN awakens the system from a soft off state.
Resume By USB (S3)(Disabled)
This item allows users to enable or disable the USB device Walk-up from S3 mode.
Resume By PS2 Device (S3) (Disabled)
These items enable or disable you to allow mouse or keyboard activity to awaken
the system from power saving mode.
.
Resume by PCI PME (Disabled)
Power-On by Alarm (Disabled)
This item allows users to enable or disable the alarm to wake up the system. If set
to Enabled, users can specify the specific day of month and the exact time to power
up the system.
Press <Esc> to return to the main menu setting page.
Hot Key Power ON (Ctrl+F1)
Use this item to allocate the hot key to wake up the system.
Power On After Power Fail (Off)
This item enables your computer to automatically restart or return to its last oper-
ating status.
This system can be turned off with a software command. If you enable this item,
the system can automatically resume if there is an incoming call on the PCI
Modem card or PCI LAN card. You must use an ATX power supply inorder to
use this feature. Use this item to do wake-up action if inserting the PCI card.
To Next Page
Loading...
Need help?
General
