33
Using BIOS
Genuine Inter(R) CPU 0 @ 3.10 GHz
This is display-only field and diaplays the information of the CPU installed in your
computer.
EMT64 (Supported)
This item shows the computer supports EMT64.
Processor Speed (3100MHz)
This item shows the current processor speed.
Processor Stepping (206a5)
This item shows the processor stepping version.
Microcode Revision (7)
This item shows the Microcode version.
Processor Cores (4)
This item shows the core number of the processor.
Intel HT Technology (Supported)
This item shows that your computer supports Intel HT technology or not.
Limit CPUID Maximum (Disabled)
Use this item to enable or disable the maximum CPUID value limit. When supports
Prescott and LGA775 CPUs, enables this to prevent the system from “rebooting”
when trying to install Windows NT 4.0.
Excute Disable Bit (Enabled)
This item allows the processor to classify areas in memory by where application code
can execute and where it cannot. When a malicious worm attempts to insert code in
the buffer, the processor disables code execution, preventing damage or worm propa-
gation. Replacing older computers with Execute Disable Bit enabled systems can halt
worm attacks, reducing the need for virus related repair.
Intel Virtualization Technology (Enabled)
When disabled, a VMM cannot utilize the additional hardware capabilities provided
by Vandor Pool Technology.
Power Technology (Energy Efficient)
Use this item to control the Energy mode of the processor.
Press <Esc> to return to the Advanced Menu page.
Hyper-threading (Enabled)
This item is only available when the chipset supports Hyper-threading and you are
using a Hyper-threading CPU.
To Next Page
Loading...
Need help?
General
