ECS X58B-A2 User Manual

51
ATI CrossFire
TM
Technology Support
Chapter 5
ATI CrossFire
TM
Technology Support
This motherboard supports the ATI CrossFire
TM
Technology that allows you to
install multi-graphics processing units (GPU) graphics cards. Follow the installation
procedures in this section.
Requirements
1 You should have a CrossFire
TM
Ready motherboard, a CrossFire
TM
Edition
graphics card and a CrossFire
TM
ready graphics card.
2 You would need a Crossfire
TM
bridge cable.
3 Make sure that your graphics card driver supports the ATI CrossFire
TM
technology. Download the latest driver from the ATI website
(www.ati.com).
4 Make sure that your power supply unit (PSU) can provide at least the
minimum power required by your system.
Installing CrossFire
TM
graphics cards
1. Insert the CrossFire
TM
graphics cards into the PCIEX16_1 and PCIEX16_2 slots.
Make sure that the card is properly seated on the slot.
2. Connect the two graphics cards with the CrossFire
TM
Bridge.

ECS X58B-A2 Specifications

General

Brand	ECS
Model	X58B-A2
Category	Motherboard
Language	English