Need help?Do you have a question about the EDAN SD5 and is the answer not in the manual?
General| Type | Fetal Doppler |
|---|---|
| Probe Frequency | 1 MHz |
| Battery Type | Rechargeable lithium-ion battery |
| Battery Life | >4 hours |
| Storage Conditions | Temperature: -20 °C ~ +55 °C; Humidity: ≤ 93%; Atmospheric pressure: 50 kPa ~ 106 kPa |
Discusses copyright, intellectual property, and modification rights related to the manual.
Outlines EDAN's responsibility for safety, reliability, and performance of the equipment.
Explains key concepts and definitions for safety precautions and operation.
Specifies the intended users and applications for the SD5/SD6 Doppler.
Lists essential safety precautions and warnings for operating the device.
Explains the various symbols used in the manual and on the device.
Provides an overview and labeling of the main unit's components and ports.
Details the different probe types (wired and wireless) and their components.
Identifies and explains the functions of the main unit's control keys.
Describes the status indicators on the main unit and probe.
Explains the displays and icons shown on the Doppler's LCD screen.
Guides on unpacking and inspecting the Doppler and accessories.
Details procedures for fitting and charging batteries for the main unit and probe, including care.
Explains how to connect the power cable to the Doppler and power outlet.
Details how to connect and use the wired probe.
Provides instructions on how to switch on the main unit and probe.
Explains how to switch off the main unit and wireless probe.
Guides on using an earphone with the Doppler for better audio.
Details how to adjust settings like backlight, key sound, auto-shut-off, language, date/time, and date format.
Provides instructions for safely replacing fuses in the device.
Details visual, routine, and mechanical inspections before and during use.
Provides guidance on maintaining the unit's exterior and LCD.
Outlines procedures for cleaning the main unit and probe.
Explains disinfection methods for the main unit and probe.
Addresses sterilization procedures as per hospital regulations.
Details EDAN's product warranty terms and conditions.
Provides contact details for technical support and service.
Lists environmental operating and storage conditions.
Details dimensions, weight, power supply, and compliance.
Outlines performance metrics like FHR range, resolution, and recording.
Specifies battery types, capacity, voltage, and life for main unit and probe.
Presents a summary table of low acoustic output parameters.
Declares electromagnetic emission compliance and guidance.
Details electromagnetic immunity test levels and guidance.
Details electromagnetic immunity test levels and guidance.
Provides recommended separation distances for RF communications equipment.
Discusses the benefits and safety of diagnostic ultrasound in medical practice.
Explains ultrasound safety and the As Low As Reasonably Achievable principle.
Defines and explains Mechanical Index (MI) and Thermal Index (TI).
Advises on prudent use of ultrasound despite no confirmed bioeffects.
Lists references related to acoustic output and safety standards.
Provides a list of acoustic output parameters for probes.
Details the overall sensitivity of the SD5 with a 2MHz wired probe.
Details the overall sensitivity of the SD5 with a 3MHz wired probe.
Details the overall sensitivity of the SD6 with a 2MHz wireless probe.
Details the overall sensitivity of the SD6 with a 3MHz wireless probe.
To Next Page
