EDAN SE-1200 Series - 10.7 Lead Setup

SE-1200 Series Electrocardiograph User Manual System Setup
- 97 -
Enable/Disable
WIFI
Press Tab to move the cursor to Enable WIFI or Disable WIFI, press
Enter to enable or disable WIFI.
Add WIFI If the network is on closed broadcasting, you can add it manually.
Press Tab to move the cursor to Add Wifi, and then press Enter to open
the Enter Network Name dialogue box. Enter the network name, and
then press Enter in the dialogue box, the entered network will be
displayed in the WIFI Setup window. If the entered network is not found,
the hint Net Not Found pops up.
Refresh
Press to search the networks in the wireless network region.
Connect
Press to highlight a network, select Connect to build a network
connection. If the Enter Password dialogue box pops up, you can build a
network connection after entering correct password.
Return
Press to return to the System Setup window and the settings will be
saved.
10.7 Lead Setup
Select Lead on the System Setup screen, and press Enter to open the Lead Setup window.
Figure 10-9 Lead Setup Window
理邦保密文件
EDAN CONFIDENTIAL