To Next PageTo Next Page
Need help?Do you have a question about the EDAN SE-3 Series and is the answer not in the manual?
General| Paper Type | Thermal paper |
|---|---|
| Display | 3.5 inch LCD |
| Leads | 12-lead |
| Recording | Thermal printing system |
| Connectivity | USB |
| Power Supply | AC/Rechargeable Battery |
| Recording Mode | Automatic, Manual, Rhythm |
| Filters | AC, EMG, and Drift |
| Paper Size | 80 mm |
| Battery | Rechargeable Li-ion battery |
Specifies the intended use of the electrocardiograph for acquiring ECG signals from adult and pediatric patients.
Lists critical safety warnings regarding equipment usage, installation, power, and patient safety.
Provides essential warnings and precautions for handling and operating the lithium battery to prevent hazards.
Details the control panel layout and the function of each key on the SE-3 and SE-300 series devices.
Details the procedures for connecting the power supply, including mains and battery options, and earthing requirements.
Explains how to connect the patient cable to the electrocardiograph unit and electrodes, emphasizing the use of original accessories.
Describes the process of attaching electrodes, distinguishing between reusable and disposable types.
Explains how to input and manage patient demographic and identification data before ECG acquisition.
Covers the different modes available for printing ECG reports, including AUTO, MANUAL, RHYTHM, and USBPRT.
Guides on how to transmit ECG data to a PC via serial or net port, requiring specific software.
Explains the process of copying ECG records between the electrocardiograph and a U disk, including import and export procedures.
Guides on setting up different work modes like AUTO, MANUAL, RHYT, R-R, and their associated parameters.
Details the configuration of various filters (AC, DFT, EMG, Lowpass) and lead sequences for optimal ECG signal processing.
Covers settings related to record style, auto sequence, length, rhythm mode, speed, and gain for ECG reports.
Guides on configuring data transmission settings, including device number, auto transmission, transmission mode, and IP addresses.
Addresses common issues related to operating, printing, transmitting, and main unit problems with solutions.
Provides general guidelines for keeping the equipment clean, handling liquids, and avoiding damage.
Lists safety standards compliance, shock protection degree, and protection against water ingress.
Lists detailed performance specifications for recording, HR recognition, ECG unit, and pacemakers.
