EDAN SE-3 Series - R-R Mode; Sample ECG Reports; ECG Reports in the AUTO Mode

SE-3&SE-300 Series Electrocardiograph User Manual Sampling and Printing ECG
- 36 -
5) It will stop automatically after printing a complete report of rhythm-lead ECG waveforms.
Or press the PRINT/STOP key again to stop printing ECG reports.
6.2.4 R-R mode
In the R-R mode, you can print ECG waveforms of 180s.
1) Press the MODE/RST key to select the R-R mode; which will be displayed in the bottom
right corner of the LCD screen.
2) Press the SENS key to set the sensitivity.
3) Set the suitable speed value and filter value.
4) Press the PRINT/STOP key to begin printing reports. Or press the PRINT/STOP key
again to stop printing ECG reports.
6.3 Sample ECG Reports
6.3.1 ECG Reports in the AUTO Mode
Figure 6-1 ECG Reports in the AUTO Mode (a)
Figure 6-2 ECG Reports in the AUTO Mode (b)
Figure 6-1 and Figure 6-2 show an ECG report in the auto mode. Template is selected, and
Record Style is set to 3×4.