Do you have a question about the EDAN SE-1 and is the answer not in the manual?
SpO2 Measurement Range | 0-100% |
---|---|
Power Supply | 100-240V AC, 50/60Hz |
Parameters Monitored | ECG, SpO2, NIBP |
Lead Selection | I, II, III, aVR, aVL, aVF |
Paper Speed | 12.5, 25, 50 mm/s |
Battery Type | Rechargeable lithium battery |
Weight | 2.5 kg |
Provides critical safety information and potential hazards for safe operation and use.
Guides on patient instruction, skin prep, and attaching electrodes for accurate readings.
Lists essential checks before operating the electrocardiograph for safety and performance.
Procedures for cleaning and disinfecting the main unit, cable, and electrodes.
Instructions for recharging, replacing, and caring for the internal battery.
Outlines essential safety checks to be performed periodically on the equipment.
Lists safety standards and electrical shock protection classifications.
Outlines the technical performance metrics of the electrocardiograph.