SE-1 Electrocardiograph User Manual About SE-1 Application Interface
- 20 -
Fourth Row:
♦ Sensitivity (×1, ×2, AGC, · 25, · 5)
♦ Paper speed (25, 50)
♦ Battery capacity symbol ( ， ， ， )
♦ When you are setting the ID, sex or age group, the item will be shown here. The hint
BATTERY WEAK will be shown here when the battery capacity is low.
3.2 About the System Setup Interface
When the main interface is displayed, press the MENU key to open the system setup interface.
Press the MENU key again to return to the main interface.
Figure 3-2 System Setup Interface
1. Press the ID key (the up or down arrow) to move the arrow
on the right of the LCD screen to the item to be changed.
2. Then press the M/F or AGE key to select an option for the item.
3. After setting the items, press the MENU key to exit the system setup interface.
: ALL
: ON
: 3
: SECOND
FILTER SETTING
PWAVE START
RECORD LENGTH
RECORD COUNT
To Next Page
Loading...
