EDAN SE-1 - Chapter 2 Introduction; Top Panel

SE-1 Electrocardiograph User Manual Introduction
- 10 -
Chapter 2 Introduction
SE-1 electrocardiograph is a high-performance single channel digital electrocardiograph.
1-channel ECG wave and the real-time heart rate can be viewed on the LCD screen, and printed
out by using a high resolution thermal recorder. The auto and manual modes can be chosen freely.
SE-1 can be powered by the mains supply or a built-in rechargeable lithium battery.
Configuration: main unit and accessories, including patient cable, chest electrodes, limb
electrodes, thermal recorder paper, power cord etc.
WARNING
1. This equipment is intended for use on adult and pediatric patients only.
2. This equipment is not designed for direct cardiac application.
3. The results given by the equipment should be examined based on the overall clinical
condition of the patient, and they can not substitute for regular checking.
2.1 Top Panel
Figure 2-1 Main Unit
LCD Screen
Patient Cable Socket
Recorder Paper
RS232 Socket
(Rese
Recorder
Key Panel
External Input/Output
Socket
USB Interface
(Reserved)