SE-1 Electrocardiograph User Manual Entering Patient Information
- 31 -
Chapter 6 Entering Patient Information
1. Entering ID Number
Press the ID key (the up or down arrow) to set the patient’s ID.
Press the up arrow key to increase the ID number and press the down arrow key to
decrease the ID number.
After set, the ID number will be displayed for one or two seconds in the last row on the
LCD screen, such as ECG 256 in the above figure.
In the auto or manual mode, if you press PRINT/STOP to print a new report, the ID
number will increase by one automatically.
2. Entering the Patient’s Sex
Press the M/F key to set the sex of the patient, which will be displayed for one or two
seconds in the last row on the LCD screen, such as MALE in the above figure.
3. Entering the Patient’s Age Group
Patients are divided into three age groups: CHILD, ADULT, OLD. Press the AGE key to
set the age group, which will be displayed for one or two seconds in the last row on the
LCD screen, such as ADULT in the above figure.
Note: The patient information mentioned above can not be set or changed during the
printing course.
AUTO 1 II
І NO
FLT = ALL
×1 25 ECG256 MALE ADU
T
10 : 50
To Next Page
Loading...
