Need help?Do you have a question about the EDAN SE-601B and is the answer not in the manual?
General| ECG Channels | 6 |
|---|---|
| ECG Leads | I, II, III, aVR, aVL, aVF, V1-V6 |
| SpO2 Measurement Range | 0-100% |
| Power Supply | AC 100-240V, 50/60Hz |
| Battery | Rechargeable lithium-ion battery |
| Printing | Built-in thermal printer |
| Lead Configuration | Standard 12 leads |
| Display | 5.7-inch LCD |
| Recording Speed | 5/6.25/10/12.5/25/50 mm/s |
| ECG Cable | Standard 10-lead cable |
| Parameters Monitored | ECG |
| Respiration Measurement Range | 0-120 bpm |
| Battery Life | Approximately 4 hours |
| Data Storage | Internal memory |
| Connectivity | LAN |
| Interface | USB |
Defines the purpose and scope of the SE-601 electrocardiograph.
Provides essential safety information for using the electrocardiograph safely.
Covers essential steps for connecting power and ensuring proper earthing of the electrocardiograph.
Outlines the necessary steps for preparing the patient before attaching electrodes.
Details the procedure for connecting the patient cable to the unit and electrodes.
Explains the correct placement and attachment of ECG electrodes to the patient's body.
Explains how to print ECG reports using the automatic mode, including settings.
Guides users on printing ECG reports in manual mode, allowing lead selection.
Details the process for printing rhythm ECG strips in single or three-lead styles.
Explains how to print R-R interval analysis reports, including histograms and trend charts.
Outlines procedures for transferring ECG data to a computer for analysis.
Details methods for transferring saved ECG files to a personal computer.
Configures the operating mode of the electrocardiograph (Auto, Manual, Rhythm, R-R).
Configures various filters (AC, EMG, DFT, Lowpass) to improve ECG signal quality.
Configures recording parameters like device, paper marker, patient info, speed, and gain.
Configures lead selections for rhythm analysis and lead sequence.
Configures network and serial transmission settings for data transfer to a PC.
Addresses common issues encountered during the operation of the electrocardiograph.
Provides solutions for common issues related to printing ECG reports.
Offers solutions for issues encountered during data transmission to a PC.
Addresses operational issues related to the main unit of the electrocardiograph.
To Next Page
