SE-601 Series Electrocardiograph User Manual System Setup
- 98 -
9.9.4 Entering Institution
Press Tab or Shift + Tab to move the cursor to the Institution textbox in the More Setup window,
and then manually input the institution name. For SE-601B/C, the range is within 20 characters.
For SE-601A, the range is within 10 characters.
9.9.5 Restoring Default Settings
For SE-601B/C, press Tab or Shift + Tab to move the cursor to the Default item in the More
Setup window, and then press F1 or F2 to select No or Ye s.
For SE-601A, press F1, F2, Tab or Shift + Tab to move the cursor to the Default item in the
More Setup window, and then press F3 or F4 to select No or Ye s.
If Default is set to Yes, the system restores the default settings shown in the following table.
Table 9-1 System Setup Defaults
Setup Default
1 Work Mode Auto
2 Sample Mode Real-time Sample
3 Sample Time 10s
4 AC filter On
5 EMG filter Off
6 DFT filter 0.67Hz
7 Lowpass filter 100Hz
8 Gain 10mm/mV
9 Speed 25mm/s
10 Measure On
11 Analysis On
12 Transmission Mode Off
13 Lead Sequence Standard
14 Rhythm Lead 1 II
15 Rhythm Lead 2 V1
16 Rhythm Lead 3 V5
17 Display Colors Option 1
18 Antialising Off
19 QRS Volume Off
20 Hint Volume
Medium (SE-601B/C)
On (SE-601A)
21 Key Volume
Low (SE-601B/C)
On (SE-601A)
22 Notification Volume Off
To Next Page
Loading...
