EDAN SE-1 - Connecting the Patient Cable to the Electrocardiograph and Electrodes

SE-1 Electrocardiograph User Manual Operation Preparations
- 24 -
4.4 Connecting the Patient Cable to the
Electrocardiograph and Electrodes
WARNING
The performance and electric shock protection can be guaranteed only if the original
patient cable and electrodes of the manufacturer are used.
The patient cable includes the main cable and the lead wires which can be connected to electrodes
according to the colors and the identifiers.
1. Connecting the Patient Cable to the Electrocardiograph
Connect the patient cable to the patient cable socket on the right side of the main unit, and then
secure them with two screws.
2. Connecting the Patient Cable to Electrodes
Align all lead wires of the patient cable to avoid twisting, and connect the lead wires to the
electrodes. Firmly attach them.
WARNING
This product is CF classified and defibrillation protected only when the original patient
cable is used. However, remove electrodes before defibrillation when possible as a safety
precaution.
Connecting to
Electrocardio
g
ra
p
h
Screw
Main Cable
Connecting to
Electrodes
Lead Wires