SE-1 Electrocardiograph User Manual About SE-1 Application Interface
- 19 -
Chapter 3 About SE-1 Application Interface
The following sections provide an overview of the main functions in the SE-1 application. After
you turn on the device, the main interface pops up. Then you can press the MENU key to open
the system setup interface.
3.1 About the Main Interface
Figure 3-1 Main Interface
The LCD screen can be revolved and settled freely at different angles.
Normally, the contents displayed on the LCD screen include: (described from left to right in
row order)
First Row:
♦ Working mode (AUTO1, AUTO2, AUTO3, AUTO4 and MANU)
♦ II stop symbol, which will turn to
during the printing course
♦ Hint information (LDOFF, PAPER?, etc.)
♦ Current time
Second Row:
♦ Current lead (І, П, Ш, aVR, aVL, aVF, V1, V2, V3, V4, V5, V6)
♦ Heart rate
(--, actual heart rate, or OVR)
Third Row:
♦ Filter setting (FLT = AC, EMG, ALL, OFF)
♦ ECG wave
To Next Page
Loading...
