Edco DS-18 - OPERATING CONTROLS

MPS-I-0819
Page 12
Page 13
MPS-I-0819
E-SPTS-I-0809
800-638-3326 • edcoinc.com • sales@edcoinc.com 800-638-3326 • edcoinc.com • sales@edcoinc.com
EQUIPMENT DEVELOPMENT CO., INC. EQUIPMENT DEVELOPMENT CO., INC.
Operating Controls
Diagrams shown with Honda Cyclone Dual-Filter Element Engine as an example.
Consult the Engine Manufacturer’sOwner’s Manual for information on specic models.
Please Note:
Controls shown are for the model indicated.
The location of these controls may vary on the
di󰀨erent models.
Due to improvements and changes in the
equipment, the illustration shown may be dif-
ferent from the actual machine.
Electric Powered
Figure 3
Motor Starter
Reset/Stop
Start Switch Box
Depth Control
Handwheel Knob
Guide Bar
Electrical Plug
(SB-14 SHOWN)
Water
Valve Lever
Water Hose
Connector
“WHIPCHEK
TM
”
Safety Cable
Belt Tension Adjustment
Pneumatic Saw
Depth Control
Handwheel Knob
Oil Regulator Knob
Oil Sight Glass
Guide Bar
Filter Sight
Glass
Air Pressure
Gauge
Air Hose
Coupler
Air Regulator
Valve
(ASB-14 SHOWN)
(Do not adjust air supply
without “WHIPCHEK
TM
” cable
being properly installed.)
Optional
Vacuum
Port
Figure 2
Depth Control
Handwheel Knob
Engine Stop Switch
Throttle
Control
Choke Control
Guide Bar
Gasoline Powered
( DS-18 SHOWN)
Recoil
Starter Grip
Lifting Bail
Guide Pointer
Figure 4