MPS-I-0819
Page 4
Page 5
MPS-I-0819
E-SPTS-I-0809
800-638-3326 • edcoinc.com • sales@edcoinc.com 800-638-3326 • edcoinc.com • sales@edcoinc.com
EQUIPMENT DEVELOPMENT CO., INC. EQUIPMENT DEVELOPMENT CO., INC.
• Equipment should only be operated by trained person-
nel in good physical condition and mental health (not
fatigued). The operator and maintenance personnel
must be physically able to handle the bulk weight and
power of this equipment.
• This is a one person tool. Maintain a safe operating
distance to other personnel. It is the operators’ re-
sponsibility to keep other people (workers, pedestrians,
bystanders, etc.) away during operation. Block o the
work area in all directions with roping, safety netting, etc.
Failure to do so may result in others being injured by y-
ing debris or exposing them to harmful dust and noise.
• This equipment is intended for commercial use only.
• For the operator’s safety and the safety of others, always
keep all guards in place during operation.
• Never let equipment run unattended.
• Personal Protection Equipment and proper safety attire
must be worn when operating this machinery. The opera-
tor must wear approved safety equipment appropriate for
the job such as hard hat and safety shoes when condi-
tions require. Hearing protection MUST be used when
operational noise levels of this equipment may exceed
85db. Eye protection MUST be worn at all times.
OPERATOR RESPONSIBILITIES
• Read and follow all safety decals and labels.
• Maintain a safe operating distance to other personnel.
• Be familiar with all aspects of the machine’s operation and
controls before applying power to the equipment.
• Use the correct accessory for the job being performed
and material being removed. Make sure accessories are
mounted correctly.
• Never operate this machine while under the inuence of
drugs or alcohol, while taking medications that impair the
senses or reactions, or when excessively tired or under
stress.
• Follow the instructions in the operator’s manual and
exercise caution.
• Comply with all local safety and health regulations as well
as EPA and OSHA regulations.
• Read/Maintain a copy of the equipment’s operator’s
manual and the engine/motor manufactures operators
manual with the machine for reference at all times.
• Be sure all decals on the machine can be clearly read
and understood. Replace worn/missing decals immediately.
GENERAL INSTRUCTIONS
Keep body parts, loose clothing and accessories
away from moving parts. Failure to do so could
result in dismemberment or death.
• Do not modify the machine.
• Stop motor/engine when adjusting or servicing this equip-
ment. Maintain a safe operating distance from am-
mable materials. Sparks from the cutting-action
of this machine can ignite ammable materials or
vapors.
SAFETY INFORMATION
To Next Page
Loading...
