2. Installation
2.1. Product installation cautions
2.1.1 Installation environment
1.Please install the inverter indoors in a ventilated environment, away from humid and corrosive
environments. The inverter is not waterproof.
Ambient temperature:0~55℃，Relative humidity: 0~85% Non-condensing.
Install carrier and direction
Please mount the inverter on a strong surface, away from flammable and explosive materials.
The installation direction can be horizontal or vertical. Pay attention to the installation position to
reserve a enough space for heat dissipation. It is not recommended to install it in a confined space,
as it will affect the heat dissipation of the inverter when it is working. If it must be installed in a
confined space, please install a fan on the box to extract hot air.
When the inverter is running, the temperature of the chassis and the heat sink can be high. Do
not install the inverter in locations where it can be inadvertently touched.
Do not install the inverter in areas where flammable or explosive materials are stored.
2.1.2 Installation space
For proper air circulation to dissipate heat, allow a clearance of approximately 10 cm to the side and
approximately 20 cm front and back the unit.
To Next Page
Loading...
