Need help?Do you have a question about the EDELRID OHM and is the answer not in the manual?
Details on compatible ropes (EN 892), diameter, and minimum breaking force.
Instructions for preparing the OHM with an express sling for the first protection point.
Explains the OHM's non-loaded rest position and its activated state during tensile loading.
Guidance on attaching the OHM to the first protection point and required spatial clearances.
Method to restore the OHM to its rest position by shaking the rope.
Step-by-step guide for opening, inserting the rope, and closing the OHM.
Warnings against forbidden attachments and improper rope feeding methods.
General safety notes on equipment combinations, PPE, and avoiding damage.
Operating temperatures, service life factors, and criteria for removing the product from use.
Guidelines for regular inspection, authorized repairs, and routine lubrication.
General| Rope Compatibility | 8.9 - 11 mm |
|---|---|
| Minimum Weight of Lead Climber | 40 kg |
| Certification | EN 15151-1 |
| Material | Aluminum, Stainless Steel |
| Type | Rope brake |
To Next Page
